Page MenuHomePhabricator
Files F7159758

No OneTemporary
Actions

View Options

diff --git a/config.ini.sample b/config.ini.sample
index 0c2bef0..b0b3d47 100644
--- a/config.ini.sample
+++ b/config.ini.sample
@@ -1,135 +1,135 @@
; SylkServer configuration file
[Server]
; The following settings are the default used by the software, uncomment
; them only if you want to make changes
; default_application = conference
; Statically map a Request URI to a specific application. In the example
; below, 123 is matched 1st against the domain part, than the username part
; of the Request URI This static mapping can be overwritten by adding
; X-Sylk-App header set to the value of a valid SylkServer application name
; application_map = echo:echo,123:conference,test:ircconference,gmail.com:xmppgateway
; Disable the specified applications
; disabled_applications =
; Directory where extra applications are stored
; extra_applications_dir =
trace_dir = /var/log/sylkserver
; trace_core = False
; trace_sip = False
; trace_msrp = False
; trace_notifications = False
; TLS is used by default for SIP signaling and MSRP media using a
; self-signed certificate. You may want to use a properly signed X.509
; certificate and configure it below
; The X.509 Certificate Authorities file
ca_file = /etc/sylkserver/tls/ca.crt
; The file containing X.509 certificate and private key in unencrypted format
certificate = /etc/sylkserver/tls/default.crt
; verify_server = False
; Enable Bonjour capabilities for applications
; enable_bonjour = False
; Base directory for files created by the server, excluding log files
; spool_dir = /var/spool/sylkserver
[SIP]
; SIP transport settings
; IP address used for SIP signaling and RTP media; an empty string or 'any' means listening on
; the interface used by the default route
; local_ip =
; IP address to be advertised in the SDP, useful in 1-to-1 NAT scenarios such as Amazon EC2
; advertised_ip =
; Ports used for SIP transports, if not set to any value the transport will be disabled
; local_udp_port = 5060
; local_tcp_port = 5060
; local_tls_port = 5061
; If set, all outbound SIP requests will be sent through this SIP proxy
; The proxy address format is: proxy.example.com:5061;transport=tls
; Transport can be udp, tcp or tls, if skipped it is considered udp
; If only the hostname is set, RFC3263 lookups are performed to lookup
; the outbound proxy server address
; outbound_proxy =
; A comma-separated list of hosts or networks to trust.
; The elements can be an IP address in CIDR format, a
; hostname or an IP address (in the latter 2 a mask of 32
; is assumed), or the special keywords 'any' and 'none'
; (being equivalent to 0.0.0.0/0 and 0.0.0.0/32
; respectively). It defaults to 'any'.
; trusted_peers =
; Toggle ICE support (RFC 5245)
; enable_ice = False
[MSRP]
; MSRP transport settings
; A valid X.509 certificate is required for MSRP to work over TLS.
; TLS is enabled by default, a default TLS certificate is provided with SylkServer.
; use_tls = True
[RTP]
; RTP transport settings
; Allowed codec list, valid values: opus, G722, speex, PCMU, PCMA, iLBC, GSM
-; audio_codecs = opus,speex,G722,PCMU,PCMA
+; audio_codecs = opus,G722,speex,PCMU,PCMA
; Port range used for RTP
; port_range = 50000:50500
; SRTP valid values: disabled, sdes, zrtp, opportunistic
; srtp_encryption = opportunistic
; RTP stream timeout, session will be disconnected after this value
; timeout = 30
; Audio sampling rate
-; sample_rate = 32000
+; sample_rate = 48000
[WebServer]
; Global web server settings
; IP address used for serving HTTP(S) requests, empty string
; means listen on interface used by the default route
; local_ip =
; Port where the web server will listen on, set to 0 for random
; local_port = 10888
; X.509 server certificate for HTTPS connections, the certificate private
; key must be concatenated inside the same file, set to empty in order to
; disable HTTPS
; certificate = /etc/sylkserver/tls/default.crt
; Certificat chain file containing all the certificates that the server
; should present to the client. If specified, it must also contain the
; certificate in the file specified by the 'certificate' option.
; certificate_chain
; Hostname used when publishing the server URL. Must match the common name
; of server X.509 certificate set above, otherwise clients will raise
; warning. If not set the listening IP address will be used
; hostname =

File Metadata

Mime Type
text/x-diff
Expires
Sat, Nov 23, 11:26 AM (1 d, 8 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
3400799
Default Alt Text
(4 KB)

Event Timeline