diff --git a/config.ini.sample b/config.ini.sample
index c622548..26aaf6d 100644
--- a/config.ini.sample
+++ b/config.ini.sample
@@ -1,82 +1,84 @@
 ; SylkServer configuration file
 
 [Server]
 
 ; The following settings are the default used by the software, uncomment
 ; them only if you want to make changes
 
 ; default_application = conference
 
 ; Map user part of the Request URI to a specific application
 ; application_map = 123:conference,test:irc-conference
 
 ; trace_dir = /var/log/sylkserver
 ; trace_sip = False
 ; trace_msrp = False
 ; trace_notifications = False
 
 ; TLS can be used for encryption of SIP signaling and MSRP media. TLS is
-; disabled by default.  To enabled TLS, you must have a valid X.509
+; disabled by default.  To enable TLS, you must have a valid X.509
 ; certificate and configure it below, then set the local_tls_port in the SIP
 ; section and use_tls in MSRP section
 
 ; The X.509 Certificate Authorities file
 ; ca_file = /etc/sylkserver/tls/ca.crt
 
 ; The file containing X.509 certificate and private key in unencrypted format 
 ; certificate = /etc/sylkserver/tls/sylkserver.crt
 
 ; verify_server = False
 
 
 [SIP]
 
 ; SIP transport settings
 ; IP address used for SIP signaling; empty string or any means listen on interface used
 ; by the default route
 ; local_ip =
 
 ; Ports used for SIP transports, if not set to any value the transport will be disabled
 ; local_udp_port = 5060
 ; local_tcp_port = 5060
 ; local_tls_port =
 
 ; If set all outbound SIP requests will be sent through this SIP proxy
 ; outbound_proxy =
 
 ; A comma-separated list of hosts or networks to trust.
 ; The elements can be an IP address in CIDR format, a
 ; hostname or an IP address (in the latter 2 a mask of 32
 ; is assumed), or the special keywords 'any' and 'none'
 ; (being equivalent to 0.0.0.0/0 and 0.0.0.0/32
 ; respectively). It defaults to 'any'.
 ; trusted_peers =
 
 
 [MSRP]
 
 ; MSRP transport settings
 
 ; Indicate if ACM should be offered. If set to true (default) the server will offer 'actpass'
-; for outbound sessions
+; for outbound sessions, alowing clients to connect to the server without using a MSRP relay
 ; use_acm = True
 
+; By default MSRP media is using TCP, to enable TLS you must configure a
+; X.509 certificate in the server section and enable it here
 ; use_tls = False
 
 
 [RTP]
 
 ; RTP transport settings
 
 ; Allowed codec list, valid values: G722, speex, PCMU, PCMA, iLBC, GSM
 ; audio_codecs = G722,speex,PCMU,PCMA
 
 ; Port range used for RTP
 ; port_range = 50000:50500
 
 ; SRTP valid values: disabled, mandatory, optional
 ; srtp_encryption = optional
 
 ; RTP stream timeout, session will be disconnected after this value
 ; timeout = 30