SIP protocol offers a discovery capability. If a user wants to initiate a session with another user, he must discover the current host(s) at which the destination user is reachable. To do this, SIP network elements consult an abstract service known as a location service, which provides address bindings for a particular domain. Registration entails sending a REGISTER request to a special type of UAS known as a registrar. A registrar acts as the front end to the location service for a domain, reading and writing mappings based on the contents of REGISTER requests. This location service is then typically consulted by a proxy server that is responsible for routing requests for that domain.
This script implements REGISTER method, which registers the contact (ip, port and transport) for a given address of record (SIP address).
(NOTE) This script is available in [[sip_clients]] package that must be installed separately from SIP SIMPLe client SDK package.
Usage: sip-register [options]
This script will register a SIP account to a SIP registrar and refresh it
while the program is running. When Ctrl+D is pressed it will unregister.
-h, --help show this help message and exit
-a ACCOUNT_NAME, --account-name=ACCOUNT_NAME
The account name from which to read account settings.
Corresponds to section Account_NAME in the
-s, --trace-sip Dump the raw contents of incoming and outgoing SIP
messages (disabled by default).
-j, --trace-pjsip Print PJSIP logging output (disabled by default).
-r MAX_REGISTERS, --max-registers=MAX_REGISTERS
Max number of REGISTERs sent (default 1, set to 0 for
= Example =
Using account email@example.com
Registration succeeded at 184.108.40.206:5060;transport=udp.
Contact: sip:firstname.lastname@example.org:58481 (expires in 600 seconds).
Other registered contacts:
sip:email@example.com:5060 (expires in 262 seconds)
sip:firstname.lastname@example.org:5062;line=634g6j67 (expires in 360 seconds)
sip:email@example.com;uniq=5B2860C44383A3D6705629A7E1FB8 (expires in 734 seconds)
Registration ended: 200 OK.